Struct opentelemetry_proto::proto::logs::v1::LogRecord

pub struct LogRecord {
    pub time_unix_nano: u64,
    pub observed_time_unix_nano: u64,
    pub severity_number: i32,
    pub severity_text: String,
    pub body: Option<AnyValue>,
    pub attributes: Vec<KeyValue>,
    pub dropped_attributes_count: u32,
    pub flags: u32,
    pub trace_id: Vec<u8>,
    pub span_id: Vec<u8>,
}

A log record according to OpenTelemetry Log Data Model: https://github.com/open-telemetry/oteps/blob/main/text/logs/0097-log-data-model.md

Fields

time_unix_nano: u64

time_unix_nano is the time when the event occurred. Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January 1970. Value of 0 indicates unknown or missing timestamp.

observed_time_unix_nano: u64

Time when the event was observed by the collection system. For events that originate in OpenTelemetry (e.g. using OpenTelemetry Logging SDK) this timestamp is typically set at the generation time and is equal to Timestamp. For events originating externally and collected by OpenTelemetry (e.g. using Collector) this is the time when OpenTelemetry’s code observed the event measured by the clock of the OpenTelemetry code. This field MUST be set once the event is observed by OpenTelemetry.

For converting OpenTelemetry log data to formats that support only one timestamp or when receiving OpenTelemetry log data by recipients that support only one timestamp internally the following logic is recommended:

• Use time_unix_nano if it is present, otherwise use observed_time_unix_nano.

Value is UNIX Epoch time in nanoseconds since 00:00:00 UTC on 1 January 1970. Value of 0 indicates unknown or missing timestamp.

severity_number: i32

Numerical value of the severity, normalized to values described in Log Data Model. [Optional].

severity_text: String

The severity text (also known as log level). The original string representation as it is known at the source. [Optional].

body: Option<AnyValue>

A value containing the body of the log record. Can be for example a human-readable string message (including multi-line) describing the event in a free form or it can be a structured data composed of arrays and maps of other values. [Optional].

attributes: Vec<KeyValue>

Additional attributes that describe the specific event occurrence. [Optional]. Attribute keys MUST be unique (it is not allowed to have more than one attribute with the same key).

dropped_attributes_count: u32

flags: u32

Flags, a bit field. 8 least significant bits are the trace flags as defined in W3C Trace Context specification. 24 most significant bits are reserved and must be set to 0. Readers must not assume that 24 most significant bits will be zero and must correctly mask the bits when reading 8-bit trace flag (use flags & LOG_RECORD_FLAGS_TRACE_FLAGS_MASK). [Optional].

trace_id: Vec<u8>

A unique identifier for a trace. All logs from the same trace share the same trace_id. The ID is a 16-byte array. An ID with all zeroes OR of length other than 16 bytes is considered invalid (empty string in OTLP/JSON is zero-length and thus is also invalid).

This field is optional.

The receivers SHOULD assume that the log record is not associated with a trace if any of the following is true:

• the field is not present,
• the field contains an invalid value.

span_id: Vec<u8>

A unique identifier for a span within a trace, assigned when the span is created. The ID is an 8-byte array. An ID with all zeroes OR of length other than 8 bytes is considered invalid (empty string in OTLP/JSON is zero-length and thus is also invalid).

This field is optional. If the sender specifies a valid span_id then it SHOULD also specify a valid trace_id.

The receivers SHOULD assume that the log record is not associated with a span if any of the following is true:

• the field is not present,
• the field contains an invalid value.

Implementations

impl LogRecord

pub fn severity_number(&self) -> SeverityNumber

Returns the enum value of severity_number, or the default if the field is set to an invalid enum value.

pub fn set_severity_number(&mut self, value: SeverityNumber)

Sets severity_number to the provided enum value.

Trait Implementations

impl Clone for LogRecord

fn clone(&self) -> LogRecord

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for LogRecord

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for LogRecord

fn default() -> Self

Returns the “default value” for a type.

impl Message for LogRecord

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.

fn clear(&mut self)

Clears the message, resetting all fields to their default.

fn encode<B>(&self, buf: &mut B) -> Result<(), EncodeError>

where B: BufMut, Self: Sized,

Encodes the message to a buffer.

fn encode_to_vec(&self) -> Vec<u8>

where Self: Sized,

Encodes the message to a newly allocated buffer.

fn encode_length_delimited<B>(&self, buf: &mut B) -> Result<(), EncodeError>

where B: BufMut, Self: Sized,

Encodes the message with a length-delimiter to a buffer.

fn encode_length_delimited_to_vec(&self) -> Vec<u8>

where Self: Sized,

Encodes the message with a length-delimiter to a newly allocated buffer.

fn decode<B>(buf: B) -> Result<Self, DecodeError>

where B: Buf, Self: Default,

Decodes an instance of the message from a buffer.

fn decode_length_delimited<B>(buf: B) -> Result<Self, DecodeError>

where B: Buf, Self: Default,

Decodes a length-delimited instance of the message from the buffer.

fn merge<B>(&mut self, buf: B) -> Result<(), DecodeError>

where B: Buf, Self: Sized,

Decodes an instance of the message from a buffer, and merges it into self.

fn merge_length_delimited<B>(&mut self, buf: B) -> Result<(), DecodeError>

where B: Buf, Self: Sized,

Decodes a length-delimited instance of the message from buffer, and merges it into self.

impl PartialEq for LogRecord

fn eq(&self, other: &LogRecord) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for LogRecord